Le Cache Contemp Credenza Driftwood #36429

At just 23 inches deep and counter height, the Le Cache Contemporary Credenza in Driftwood fits where most full-size wine cabinets cannot — against a dining room wall, beneath a window, or anchoring a great room without dominating it. The weathered gray-beige driftwood finish on cherry wood veneer reads quiet and architectural, sitting comfortably alongside modern millwork, Craftsman trim or transitional interiors without demanding attention. Inside, a CellarPro cooling unit manages both temperature and humidity with precision — the distinction that separates a true aging cabinet from a refrigerator in disguise.

The single-deep layout holds 115 bottles across 93 individual racked slots and a bulk storage section, and the all-wood interlock racks accommodate oversized Burgundy and Rhône formats without modification. Foil-backed polyisocyanurate insulation and double-pane tinted glass protect against thermal swings and UV exposure, while the sealed cabinet construction keeps conditions stable over years, not just hours. Stainless bar pulls and keyed security locks finish the exterior cleanly, and the rear-vent exhaust requires only 3–4 inches of wall clearance for placement flexibility.

Best For

• Placing a 100+ bottle working collection in a dining room or living area where a full tower cabinet would be too tall or too deep
• Aging structured reds — Napa Cabernets, Bordeaux, northern Rhône — that require stable humidity alongside precise temperature control for multi-year cellaring
• A dining room or second home remodel where the cabinet finish needs to coordinate with light wood tones or painted millwork without a dark, traditional look
• Replacing a kitchen cooler or closet conversion with a unit that actively manages cellar conditions rather than approximating them

• CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.
• Foil-backed polyisocyanurate insulation: Higher R-value per inch than standard foam board, which reduces the cooling load and helps the compressor cycle less frequently - a practical benefit for both energy use and noise in living spaces.
• Adjustable humidity control: Unlike wine coolers and refrigerators that ignore humidity, this cabinet actively manages moisture levels - important for long-term aging where cork integrity matters.
• 3 3/4-inch rack slots with universal sizing: The all-wood interlock racks hold 93 bottles individually and accommodate oversized formats including Burgundy, Champagne and heavy Napa Cabernet bottles without modification.
• Rear-vent exhaust requires 3-4 inches of clearance: This is a freestanding unit, not a true built-in. Plan for rear clearance at the wall; it cannot be fully recessed flush without restricting airflow.
• Audible and visual alarms for temperature deviations, plus Energy-Saver and Quick-Chill operating modes
• Security locks on all three doors; stainless bar pulls
• 5-year warranty on the cooling system; 2-year warranty on the cabinet; optional extended warranty available
• Optional bottle probe accessory for monitoring an individual bottle's temperature directly

Brand: Le Cache

UPC: 077757364297

Size: 73w x 23d x 38 1/2h (in)

Weight: 400 lbs

Capacity: 115 bottles
Single-Deep Storage
Racked Slots: 93 bottles (3 3/4-inch Slots)
Bulk Space: approximately 22 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
• Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Rear View
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance
• Interactive Product Demo
• Watch Product Video

PLACEMENT & VENTILATION

Before choosing a location for your Le Cache wine cabinet, make sure the installation meets the following requirements.

BASIC PLACEMENT REQUIREMENTS

• Power: Standard grounded outlet on a dedicated circuit
• Room Temperature: 50–95°F
• Floor: Hard, level surface capable of supporting the fully loaded cabinet
• Door Clearance: Allow approximately 1 inch of additional width in front of the cabinet for the doors to open 90°
• Ventilation: Requirements vary depending on the cabinet and cooling configuration

VENTILATION REQUIREMENTS

Proper ventilation is essential. The cooling unit exhausts warm air, which must be able to dissipate without being drawn back into the unit. Poor ventilation can prevent the cabinet from reaching the desired temperature and may cause the cooling unit to overheat or run continuously.

SUMMARY

1. UPRIGHT CABINET / TOP-VENTED

Our upright wine cabinets with top-vented cooling are designed so the cabinet can be placed directly against the rear wall.

Warm air exhausts through the top of the cabinet, while return air enters from above. Sufficient clearance above and around the cabinet is therefore required.

Minimum clearance above the cabinet:

• 18 inches: Contemporary, Carolina, Loft, Vault and Semi-Custom wine cabinets
• 12 inches: European Country, Mission and Gallery wine cabinets

Important: The sides of the cabinet must remain open so that warm air can dissipate. Top-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

2. UPRIGHT CABINET / REAR-VENTED

Upright wine cabinets can also be configured with rear-vented cooling, with return air entering from behind the cabinet. This configuration is useful when sufficient clearance above the cabinet is not available.

Requirements:

• The cabinet must be positioned 3–4 inches away from the rear wall.
• If the rear of the cabinet is not accessible, allow at least 7 1/2 inches above the cabinet so the cooling-unit air filter can be removed and replaced.
• If the rear of the cabinet is accessible, allow at least 3 inches above the cabinet for airflow. We also recommend an air deflector to direct warm exhaust air to the left of the cabinet.

Important: The sides of the cabinet must remain open. Rear-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

3. UPRIGHT CABINET / TOP-VENTED + FRONT-VENT HOOD

A Front-Vent Hood can be added to a top-vented upright cabinet when:

• The cabinet will be placed flush against the rear wall but does not have the required clearance above for a standard top-vented installation
• The cabinet will be installed in an alcove, closet or other enclosed space

Allow at least 7 1/2 inches above the cabinet for removal of the hood and air filter.

Compatibility:

• Contemporary, Loft and Vault: The Front-Vent Hood may be used with or without the decorative grille.
• European Country, Mission, Carolina and Gallery: The Front-Vent Hood may be used without the decorative grille. The grille will not fit with the crown moldings.

4. CREDENZA

Credenzas do not require clearance above the cabinet; however, because both intake and exhaust ventilation occur behind the cabinet, credenzas require 3–4 inches of clearance behind the cabinet, and the sides must remain open for proper ventilation.

POWER REQUIREMENTS

The cooling unit plugs into a standard grounded wall outlet. The power cord extends approximately 6 1/2 feet from the rear of the cabinet.

The outlet must be on a dedicated circuit. The cooling unit components draw 3 amps, and the electrical outlet on the side of the cooling unit is also rated for 3 amps.

Do not share the circuit with another motor- or compressor-driven appliance such as a refrigerator, wine cooler, air conditioner or garage door opener.

We recommend using a surge protector rated for at least 15 amps to protect the cooling unit from power surges.

If an extension cord is necessary, use a grounded cord with 14-gauge wire or heavier, and keep it as short as possible.

FLOOR & WEIGHT REQUIREMENTS

A fully loaded wine cabinet is extremely heavy. Make sure the floor can support the combined weight of the cabinet and wine.

The cabinet should also be placed on a hard, level surface. On thick carpeting, the cabinet may settle unevenly over time, which can affect door alignment.

If installing on thick carpet, place a carpet board beneath the cabinet. You may purchase one from Le Cache or have a local hardware store cut a 3/4-inch plywood board to the width x depth of the cabinet.

DOOR SWING CLEARANCE

When opened to 90 degrees, the doors extend approximately 1 inch beyond the width of the cabinet.

For cabinets without moldings, allow for this additional space when planning the installation. The extra clearance is required in front of the cabinet for the doors to open fully.

Is the Contemporary Credenza freestanding only, or can it be recessed into cabinetry?

A: This cabinet is freestanding and requires 3–4 inches of rear clearance for the exhaust vent. It cannot be fully recessed or built into a wall cavity without providing that ventilation gap. The 23-inch depth makes it shallow enough to sit against most walls, but plan for that clearance before placement — it is not a zero-clearance installation.

What is the real bottle capacity, and will it fit oversized bottles like Burgundy or large-format Bordeaux?

A: The cabinet holds 115 bottles total — 93 in racked slots spaced at 3.8 inches and approximately 22 more in the bulk storage area. The all-wood interlock racking uses a universal configuration designed to accommodate oversized bottles, so wide-shouldered Burgundy and standard Bordeaux both fit in the racked section. Magnums and larger formats are better suited to the bulk area.

How does this cabinet handle long-term aging compared to a standard wine cooler or refrigerator?

A: The difference is humidity management. Standard wine coolers and refrigerators only regulate temperature and actively dry out the air, which degrades corks over time — making them unsuitable for long-term aging. This Le Cache uses a CellarPro cooling unit with adjustable humidity control, foil-backed polyisocyanurate insulation and sealed seams to maintain both temperature and humidity at cellar conditions. It is built for long-term storage and aging, not just short-term chilling.

What are the electrical requirements, and does it need a dedicated circuit?

A: The cabinet runs on 115V AC / 60 Hz. Startup amp draw depends on which CellarPro unit is installed: the 1800QTL-ECX peaks at 14.2 amps, while the 1800QT-ECX and 1800XT-ECX both peak at 20.1 amps at startup. Running amps are much lower (2.4–3.0 amps). Given those startup loads, a dedicated 20-amp circuit is the prudent choice — particularly for the QT and XT models — to avoid tripping a shared circuit when the compressor kicks on.

What does the warranty actually cover, and for how long?

A: Le Cache provides a 2-year warranty on the entire cabinet and a separate 5-year warranty on the CellarPro cooling unit. An optional extended warranty is also available for buyers who want longer coverage. The cooling unit warranty is notably longer than the cabinet warranty because the CellarPro system is the most mechanically complex component and the one most likely to require service over a multi-year ownership period.

How quiet is this cabinet for use in a dining room or living space?

A: Le Cache specifically updated this line with what they describe as the most advanced and quietest CellarPro cooling units available. The compressor runs at 2.4–3.0 amps during normal operation, and CellarPro publishes detailed sound performance data for the 1800-series units. The Energy-Saver mode further reduces compressor cycling frequency, which lowers overall sound presence in quiet rooms. For living-space placement, the QTL variant is the quietest of the three available cooling unit options.