Le Cache Mission 1400 Provincial #883

NOW WITH THE MOST ADVANCED AND QUIETEST COOLING UNITS FROM CELLARPRO!
Straight lines and beautiful wood grains combine to achieve the timeless beauty of fine arts & crafts furniture.

Total Capacity: 172 bottles
Size: 34w x 31d x 75 1/2h (in)

For a collector who needs genuine long-term aging conditions but can't dedicate a full wall to storage, the Mission 1400 in Provincial Cherry is a serious cabinet in a compact footprint. Designed by Berkeley Mills — an acclaimed Bay Area furniture house — it draws on arts & crafts tradition with straight-grain cherry veneer, hand-carved door trim, engineered wood mullions and ebony accents that read as furniture, not appliance. Behind that, a CellarPro cooling unit manages both temperature and humidity with digital precision, backed by foil-insulated walls and double-pane tinted glass that blocks UV and holds thermal stability the way a wine cooler or refrigerator simply can’t.

Inside, 160 racked slots at 3.8-inch spacing handle standard and oversized bottles without forcing you to reorganize a mixed collection, with additional bulk space for another dozen. SB/0™ Technology lets the cabinet sit flush against the wall — top-vent exhaust means no clearance gap required at the back. The all-wood interlock racks are quiet, vibration-absorbing and built to the same standard as the cabinet exterior. Security locks, adjustable humidity control, audible and visual alarms and an optional bottle probe round out a system that handles aging without asking you to compromise on where it lives.

Best For

• Finishing a dining room or study where the storage piece has to hold its own aesthetically against other hardwood furniture
• Bridging the gap between a filled kitchen cooler and a full cellar build — 172 bottles with real humidity management changes what you can age
• Placing against a wall without planning a built-in alcove or rear ventilation cutout
• Storing a mixed collection of Bordeaux-format and oversized bottles in the same racked system without dedicated slots for each

• Premium Cherry wood veneer
• Hardwood doors and ebony accents
• Crown molding and hand-carved wood trim
• Pewter pulls and security locks
• Double-pane tinted glass
• Engineered wood mullions
• Foil-backed polyisocyanurate insulation
• CellarPro energy-efficient cooling unit (made in USA)
• Electronic Thermostat and Digital Display
• Adjustable Humidity Control
• Energy-Saver and Quick-Chill Modes
• Audible and Visual Alarms
• SB/0™ Technology - Flush against the Wall
• Top-vent exhaust
• High Performance Air Filtration System
• All-wood Interlock racks
• Universal racking fits oversized bottles
• Low-heat interior LED light
• Optional bottle probe
• 5-year warranty on the cooling system
• 2-year warranty on entire cabinet
• Optional Extended Warranty
• In-stock items ship within 5-7 days

Brand: Le Cache

UPC: 077757008832

Size: 34w x 31d x 75 1/2h (in)

Weight: 345 lbs

Capacity: 172 bottles
Double Deep storage
Racked Slots: 160 bottles (3.8 inch slots)
Bulk Space: approximately 12 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QTL-ECX: 2.4 Amps / 14.2 Amps
- CellarPro 1800QT-ECX: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-ECX: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Compressor motors draw substantially more current at the moment they start than during steady operation - your circuit must be rated to handle the startup figure without tripping, even though ongoing draw is much lower.
• Cooling Unit Models (QTL / QT / XT): The three CellarPro options differ in cooling capacity and amp draw; the right unit depends on your room's ambient temperature, insulation and thermal load — the Thermal Load Calculations guide provides the data needed to match unit to installation.

Resources:

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Top View
• Top View Drawings
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance

Watch Product Video

PLACEMENT REQUIREMENTS

POWER REQUIREMENT:
The power cord extends 6 1/2 feet from the rear of the cabinet. If an extension cord is used, it should be 14-gauge wire or thicker, grounded, and as short as possible.

The cooling unit plugs into a standard grounded wall outlet. We recommend adding a surge protector, rated at 15 amps or more (for example, click here), to protect the cooling unit from power surges.

The outlet must be on a dedicated circuit. The components of the cooling unit draw 3 amps, and the electric outlet on the side of the cooling unit also is rated for 3 amps. The cooling unit should not, under any circumstances, share a circuit with another motor or compressor-based appliance, like a wine cooler, fridge, air conditioner, or garage opener.

FLOOR SURFACE
Because of the significant weight of your wine cabinet, it is important that it be placed on a hard surface; otherwise, the cabinet may become skewed if the doors settle unevenly over time. If you will be placing your cabinet on thick carpeting, consider placing a carpet board underneath the wine cabinet. You can purchase a carpet board from Le Cache, or you can have your local hardware store cut a 3/4 inch plywood board to the following dimensions: 45w x 25d (inches).

DOOR SWING CLEARANCE
The doors of our wine cabinets swing wide by approximately 1 inch when open at 90 degrees. The additional width should be accounted for when purchasing cabinets that do not have moldings because the stated widths of our wine cabinets do not account for the door swing. Please note that the additional width is required in front of the cabinet.

WEIGHT LOAD FACTOR
After loading your wine cabinet with wine bottles, it will be extremely heavy. When selecting a location for your cabinet, make sure that the floor underneath is strong enough to support the weight of the cabinet.

TEMPERATURE REQUIREMENTS
CellarPro cooling units are designed to handle temperatures ranging from 50 to 95F.

VENTILATION REQUIREMENTS
The cooling unit generates hot air that must be exhausted in such a way that it won't be recirculated by the cooling unit. If the hot air cannot be dissipated or channeled properly, and the cooling unit is forced to recycle its own hot air, the cooling unit will be unable to maintain cold temperatures inside the wine cabinet and/or will overheat and/or will run all the time. Proper ventilation can be achieved in one of three ways:

• 1. UPRIGHT CABINETS WITH TOP-VENT CONFIGURATIONS
  Our upright wine cabinets have been engineered with top-vent cooling units and SB/0 Technology so that they can be placed right up against the wall. In this configuration, the hot air generated by the cooling unit is ventilated through the top of the wine cabinet, and the return air comes from above the wine cabinet, so there must be clearance above and to the sides of the cabinets for the hot air to dissipate, as follows:
• Contemporary wine cabinets, Carolina wine cabinets, Loft wine cabinets, Vault wine cabinets and a Semi-Custom wine cabinets require 18 inches of clearance above the wine cabinet.
• European Country wine cabinets and Mission wine cabinets require 12 inches of clearance above the wine cabinet.
• The sides always need to be open - in other words, placement in a corner, enclosed space, alcove, or closet will not work without our front-vent hood (see Configuration 3 below).

• 2. UPRIGHT CABINETS WITH Rear-Vent Configurations
  Our upright wine cabinets can be configured so that the return air comes from behind the wine cabinet. This configuration is useful in situations where sufficient clearance around the wine cabinet doesn't exist. In this configuration:
• If the rear of the wine cabinet is not accessible, a minimum clearance of 7 1/2 inches above the wine cabinet is required for removal and replacement of the cooling unit air filter.
• If the rear of the wine cabinet is accessible, a minimum clearance of 3 inches above the wine cabinet is required for proper airflow, and we recommend using our air deflector to direct the hot air exhaust to the left of the wine cabinet.
• In all cases, the wine cabinet must be placed 3-4 inches away from the rear wall.
• The sides always need to be open - in other words, placement in a corner, enclosed space, alcove, or closet will not work without our front-vent hood (see Configuration 3 below).

• 3. UPRIGHT CABINETS with Front-Vent Hoods
  If you want to place the wine cabinet flush against the wall but you don't have the required clearance (as outlined in Configuration 1 above), or you want to place the wine cabinet in an enclosed space, closet, or alcove, our front-vent hood (placed on top of the wine cabinet) can be used with 7 1/2 inches of clearance above the wine cabinet for removal of the hood and the air filter. Please note:
• Contemporary wine cabinets, Loft wine cabinets and Vault wine cabinets can use our front vent hood with OR without the decorative grill.
• European Country wine cabinets, Mission wine cabinets and Carolina wine cabinets can use our front vent hood without the decorative grill (the decorative grill will not fit with crown moldings).

4. CREDENZA WINE CABINETS
Credenza wine cabinets don't require any clearance above the wine cabinet; however, all credenzas require 3-4 inches of space behind the wine cabinet because all the ventilation (intake and exhaust) occurs behind the cabinet.

Is the Mission 1400 a built-in or freestanding cabinet?

A: It is a freestanding cabinet, but Le Cache's proprietary SB/0™ Technology allows it to sit flush against the wall with no required clearance at the rear. Heat is exhausted through the top vent rather than the back, so you can position it against a wall in a dining room, living space or finished basement without a built-in cutout or dedicated alcove.

What is the actual bottle capacity, and will it accommodate oversized bottles like Burgundy or Champagne?

A: Total capacity is 172 bottles — 160 racked slots sized at 3.8-inch openings and approximately 12 bottles in bulk stack space. The universal all-wood interlock racking is designed to accommodate oversized formats, including larger-diameter Burgundy and Champagne bottles that standard 3.125-inch slots cannot handle.

What are the electrical requirements, and can I plug it into a standard household outlet?

A: The cabinet runs on 115V AC / 60 Hz, which is a standard North American household circuit. Running amperage is low — 2.4 to 3.0 amps depending on which CellarPro 1800-series unit is installed — though startup draw can reach up to 20.1 amps momentarily. A dedicated 20-amp circuit is strongly recommended to handle compressor startup loads without tripping a breaker.

How does this cabinet handle humidity, and why does that matter for long-term aging?

A: Unlike wine coolers and refrigerators that only regulate temperature, the Mission 1400 includes adjustable humidity control managed through the CellarPro cooling unit's digital system. Maintaining proper humidity (typically 50–70%) prevents corks from drying out and oxidizing the wine — which is why this cabinet is suitable for long-term aging and cellaring, not just short-term chilling. The foil-backed polyisocyanurate insulation and double-pane tinted glass further stabilize the internal environment against ambient temperature swings.

What is the warranty, and what does it cover?

A: The cabinet carries a 2-year warranty on the entire cabinet and a 5-year warranty specifically on the CellarPro cooling system. An optional extended warranty is also available for buyers who want longer coverage. The cooling unit itself is manufactured in the USA, which simplifies service logistics compared to imported refrigeration systems.

What are the dimensions and weight, and will it fit through a standard doorway?

A: The Mission 1400 measures 34 inches wide x 31 inches deep x 75.5 inches tall and weighs 345 lbs. At 34 inches wide, it will not pass through a standard 32-inch interior doorway without removing the door from the cabinet or the doorway casing. Plan delivery access carefully — a 36-inch or wider opening is needed for clearance.