CellarPro P2 Alarm
If your CellarPro cooling unit is flashing a "P2" alarm, do the following:
- On the control panel, press and hold the "SET" and "DOWN ARROW" buttons together for 3 seconds.
- Release when the display starts blinking.
- Press and hold (again) the "SET" and "DOWN ARROW" buttons together for 7 seconds (the screen will flash again).
- Using the "UP ARROW" or "DOWN ARROW" button, scroll through the parameters until "P2P" is displayed.
- Press "SET", then press the "UP ARROW" button to change from "y" to "n"
- Press the "SET" button to confirm the setting
- The temperature will return on the display after a few seconds
Please call us at 1.877.532.2243 if you continue to have problems.