• Home
  • 1800QT Humidity Performance | Le Cache Wine Cabinets

Wine Cooling Unit Humidity Performance - 1800QT

CellarPro 1800QT vs. Breezaire WKCE 1060 Wine Cooling Units Wine Cellar Humidity


As illustrated in the chart above, CellarPro's cooling unit consistently maintained higher humidity inside the wine cellar. CellarPro's 1800 QT and Breezaire's WKCE 1060 were tested at the same time in identical wine cabinets located side-by-side with identical bottle loads in a test room with ambient humidity ranging from 30% to 35%.

Test Conditions:

  • The cooling units were tested simultaneously in side-by-side wine cabinets
  • The wine cabinets were located in an enclosed, climate-controlled test room
  • The cabinets used were both Le Cache Model 2400 wine cabinets
  • Each wine cabinet was filled with 208 bottles (73% capacity)
  • The CellarPro cooling unit was set to maintain 55°F (53°F "off" / +3°F "on")(1), and the Breezaire was set at 55°F
  • CellarPro's cooling unit was set to an RH "3" setting. Breezaire does not offer humidity control

(1) CellarPro cooling units provide maximum flexibility for controlling the environment inside a wine cellar. Rather than selecting a single temperature target, CellarPro users designate the lower and upper temperature settings during which the cooling unit cycles off and on. In the test charted above, the CellarPro cooling unit was set to cycle "off" at 53°F, and cyle "on" at 56°F (54.5°F average.