Wine Cooling Units > Modifications & Accessories > 

Modifications & Accessories

Suggested items and modifications to enhance, improve and customize your CellarPro wine cooling unit.

CellarPro Filter + Frame Kit 1800, #1368

Our poly-coated filter and metal filter frame are designed to fit snugly over the condenser coils on all CellarPro 1800 Series cooling units.

Capacity:

Size: 13w x 9h x 1d (in)

Weight: 1 lb

Our Price: $25.00

CellarPro 1800 Replacement Air Filters 2-Pack, #1365

Polyester media replacement filters are designed to fit inside our 1800 Series metal filter frames (sold separately.)

Capacity:

Size: 13w x 9h x 1d (in)

Weight: .2 lb

Our Price: $15.00

CellarPro 1800 Duct KIT (Hot Side) with Inline Fan, #1439

Allows CellarPro 1800 Series cooling units to be ducted up to 100 equivalent feet (50 feet per duct) using 6-inch ducting from start to finish (ducting must not be reduced).

Capacity:

Size: 18 1/8w x 6 3/4d x 10 1/8h (in)

Weight: 30 lb

Our Price: $299.00

CellarPro VS Duct KIT (Hot Side), #1113

Custom duct hood for CellarPro 3200 and 4200 Series wine cooling units. With this kit, the hot air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Capacity: 100 Equivalent Feet

Size: 14 1/2w x 7 7/8d x 19 11/16h (in)

Weight: 42 lb

Our Price: $299.00

CellarPro VS Duct KIT (Hot Side) with Inline Fan, #1440

Custom duct hood and inline fan allow the hot air intake/exhaust to be ducted up to 200 equivalent feet (100 feet per opening).

Capacity: 200 Equivalent Feet

Size: 14 1/2w x 7 7/8d x 19 11/16h (in)

Weight: 45 lb

Our Price: $399.00

CellarPro VS / Split Duct KIT (Cold Side) Low RH, #1476

Custom duct kit for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Only recommended for use in low humidity environments. Please use our high-humidity duct kit if the system will be used in a warm, moderate or high humidity environment.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 35 lb

Our Price: $625.00

CellarPro Mounting Clips 1800 2-Pk, #1095

These mounting clips attach to the front of CellarPro 1800 Series cooling units and are designed to be bolted to the ceiling inside the wine cellar, as follows:

  • Remove the front grill on the cooling unit by removing the 2 screws on each side of the cooling unit
  • Slide the short side of each clip under the sheet metal at the front / top of the cooling unit 
  • Spread out the clips and/or space them to align with any pre-existing holes in your ceiling / framing
  • Replace the front grill after the clips are in place

Capacity:

Size: 1.5w x 2d x 3/8h (in)

Weight: [Error processing dynamic tag getCurrentAttribute( "item", "weight" ) : record service 1095 not found] [Error processing dynamic tag getCurrentAttribute("item","weightunit") : record service 1095 not found]

Our Price: $10.00

1800 Condensate Drain Line REAR, #1606

A condensate drain line is strongly recommended for wine cellar installations of 1800 Series wine cooling units.

Capacity:

Size: 10 feet (drain line)

Weight: .0001 lb

Our Price: $75.00

1800 Condensate Drain Line REAR + Heating Element, #1709

Strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed - it cannot be retrofitted in the field.

Capacity:

Size: 10 feet (drain line)

Weight: .0001 lb

Our Price: $150.00

1800 CellarPro Power Cord Modification, #1098

If your power source is located inside the cellar, we can modify the power cord on 1800 Series cooling units to exit towards the front - rather than the rear - of the cooling unit.

Capacity:

Size: 8' 16 Gauge

Weight: [Error processing dynamic tag getCurrentAttribute( "item", "weight" ) : record service 1098 not found] [Error processing dynamic tag getCurrentAttribute("item","weightunit") : record service 1098 not found]

Our Price: $50.00

CellarPro Remote Display/Control Unit, #1603

Remote control kit and wiring for remotely locating CellarPro's control panel.

Capacity:

Size: 2 3/4w x 1 1/8h x 1 1/4d (mounting)

Weight: 5 lb

Our Price: $225.00

CellarPro Bottle Probe, #1434

Bottle probe temperature sensor allows our wine cooling units to cycle on/off based on changes in liquid temperature inside the wine cellar.

Capacity:

Size: 10 Ft Cord

Weight: .5 lb

Our Price: $99.00

CellarPro Louvered Grill, #761

Louvered grill can be mounted outside the cellar to hide the rear of the cooling unit.

Capacity:

Size: 20w x 1/4d x 12h (in)

Weight: 5 lb

Our Price: $35.00

CellarPro Air Deflector, #935

Adjustable from 10 to 14 inches and made from clear plastic, these air deflectors use strong magnets to hold the deflectors in place, even upside down!

Capacity:

Size: 10-14l x 3 1/2d x 2 1/2h (in)

Weight: .6 lb

Our Price: $10.00

CellarPro Condenser Brush, #1475

Our condenser brush is perfect for cleaning hard-to-reach condenser coils on CellarPro wine cooling units and inside Le Cache wine cabinets.

Capacity:

Size: 27l x 1d x 1h (in)

Weight: 2 lb

Our Price: $15.00

1800 Condensate Drain Line Rear RETROFIT, #1608

Condensate drain line retrofit kit for CellarPro 1800 wine cooling units.

Capacity:

Size: 8 feet (drain line)

Weight: 1.5 lb

Our Price: $100.00

Cold-Temperature Compressor Heater Factory Installed, #1727

Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating.

The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F.

Capacity:

Size:

Weight: .5 lb

Our Price: $99.00

CellarPro Outdoor Hood for Mini Split 3000S / 3000Sh, #1766

The outdoor hood allows the condensing unit from CellarPro Mini Split 3000S and 3000Sh refrigeration systems to be installed outdoors.

Capacity:

Size: 19 3/8w x 23 1/4d x 18 3/4h (in)

Weight: 46 lb

Our Price: $400.00

CellarPro Bottle Probe Extension Cord 25 Ft, #1780

Extend the distance between the bottle probe and the cooling unit by 25 feet.

Capacity:

Size: 25 Ft Cord

Weight: .75 lb

Our Price: $30.00

CellarPro Bottle Probe Extension Cord 50 Ft, #1781

Extend the distance between the bottle probe and the cooling unit by 50 feet.

Capacity:

Size: 50 Ft Cord

Weight: 1 lb

Our Price: $35.00

CellarPro 1800 Duct KIT + Inline Fan (Hot Side) RETROFIT, #1832

RETROFIT Kit allows CellarPro 1800 Series cooling units to be ducted up to 100 equivalent feet (50 feet per duct) using 6-inch or greater ducting from start to finish. Order this kit if your 1800 cooling unit already has been shipped.

Capacity:

Size: 18 1/8w x 6 3/4d x 10 1/8h (in)

Weight: 34 lb

Our Price: $299.00

1800-220V Condensate Drain Line + Heating Element, #1881

Strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 220V power and/or when the drain line cannot be used. This option must be factory-installed.

Capacity:

Size: 10 feet (drain line)

Weight: .0001 lb

Our Price: $150.00

CellarPro 1800 Front Intake Duct Hood, #1932

We created this hood to allow our CellarPro 1800 Series cooling units to be installed above - as opposed to inside - the wine cellar.

Capacity:

Size:

Weight: 4.3 lb

Our Price: $99.00

CellarPro Outdoor Hood for 6000S Split Systems, #2009

The outdoor hood allows the condensing unit from CellarPro 6000S Split refrigeration systems to be installed outdoors.

Capacity:

Size: 19 3/8w x 23 1/4d x 18 3/4h (in)

Weight: 46 lb

Our Price: $400.00

CellarPro Outdoor Hood for 8000S Split Systems, #2010

The outdoor hood allows the condensing unit from CellarPro 8000S Split refrigeration systems to be installed outdoors.

Capacity:

Size: 19 3/8w x 23 1/4d x 18 3/4h (in)

Weight: 30 lb

Our Price: $400.00

CellarPro Outdoor Hood for 4000S / 4000Sh Split Systems, #2011

The outdoor hood allows the condensing unit from CellarPro 4000S and 4000Sh Split refrigeration systems to be installed outdoors.

Capacity:

Size: 19 3/8w x 23 1/4d x 18 3/4h (in)

Weight: 35 lb

Our Price: $400.00

CellarPro Alarm Relay Wiring, #7308

If you'd like to connect your cooling unit to your home security system, we offer 2-lead wiring that is connected to the cooling unit and  will transmit a binary signal when the cooling unit enters an alarm mode.

Capacity:

Size: 8' 16 Gauge

Weight: [Error processing dynamic tag getCurrentAttribute( "item", "weight" ) : record service 7308 not found] [Error processing dynamic tag getCurrentAttribute("item","weightunit") : record service 7308 not found]

Our Price: $150.00

CellarPro VS Duct HOOD (Hot Side), #7407

Custom duct hood for CellarPro 3200 and 4200 Series wine cooling units. With this hood and a minimum of 8-inch ducting from start to finish (not included), the hot air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Capacity: 100 Equivalent Feet

Size: 14 1/2w x 7 7/8d x 19 11/16h (in)

Weight: 13 lb

Our Price: $199.00

CellarPro VS / Split Duct HOOD (Cold Side) Low RH, #7408

Custom duct hood for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Only recommended for use in low humidity environments. Please use our high-humidity duct hood if the system will be used in a warm, moderate or high humidity environment.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 15 lb

Our Price: $525.00

CellarPro 1800 Duct HOOD (Hot Side) with Inline Fan, #7409

Allows CellarPro 1800 Series cooling units to be ducted up to 100 equivalent feet (50 feet per duct).

Capacity:

Size: 18 1/8w x 6 3/4d x 10 1/8h (in)

Weight: 8 lb

Our Price: $199.00

CellarPro 1800 Duct HOOD + Inline Fan (Hot Side) RETROFIT, #7410

RETROFIT Hood allows CellarPro 1800 Series cooling units to be ducted up to 100 equivalent feet (50 feet per duct). Order this kit if your 1800 cooling unit already has been shipped.

Capacity:

Size: 18 1/8w x 6 3/4d x 10 1/8h (in)

Weight: 10 lb

Our Price: $199.00

CellarPro VS / Split Duct KIT (Cold Side) HIGH RH, #7426

Custom duct kit for CellarPro 3200/4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).


This configuration is required for use in moderate to high humidity environments.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 35 lb

Our Price: $725.00

CellarPro VS / Split Duct HOOD (Cold Side) HIGH RH, #7427

Custom duct hood for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Required for use in moderate to high humidity environments.

The hood includes the ducting hood and remote display. Insulated 8-inch or greater (required from start to finish) ducting is NOT included.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 15 lb

Our Price: $625.00

1800 Condensate Drain Line BOTTOM, #7431

A condensate drain line is strongly recommended for wine cellar installations of 1800 Series wine cooling units.

Capacity:

Size: 10 feet (drain line)

Weight: .0001 lb

Our Price: $100.00

1800 Condensate Drain Line BOTTOM + Heating Element, #7432

Condensate drain lines are strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed - it cannot be retrofitted in the field.

Capacity:

Size: 10 feet (drain line)

Weight: .0001 lb

Our Price: $175.00

CellarPro VS Duct HOOD (Hot Side) with Inline Fan, #7433

Desiged for 3200 and 4200 VS cooling units, this custom duct hood and inline fan allow the hot air intake/exhaust to be ducted up to 200 equivalent feet (100 feet per opening).

Capacity: 200 Equivalent Feet

Size: 14 1/2w x 7 7/8d x 19 11/16h (in)

Weight: 15 lb

Our Price: $299.00

CellarPro RETROFIT Remote Display/Control Unit VS, #7434

Remote control kit and wiring for remotely locating CellarPro's control panel.

Capacity:

Size: 2 3/4w x 1 1/8h x 1 1/4d (mounting)

Weight: 3 lb

Our Price: $360.00

CellarPro VS / Split Duct KIT (Cold Side) + REMOTE RETROFIT, #7509

Custom duct kit for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).

Required for use in moderate or high humidity environments.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 45 lb

Our Price: $860.00

Cold Temperature Compressor Heater RETROFIT VS, #7511

Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating.

The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F.

Capacity:

Size:

Weight: .5 lb

Our Price: $99.00

CellarPro RETROFIT Remote Display SPLIT, #7513

Remote control kit and wiring for remotely locating CellarPro's control panel.

Capacity:

Size: 2 3/4w x 1 1/8h x 1 1/4d (mounting)

Weight: 5 lb

Our Price: $360.00

Cold Temperature Compressor Heater RETROFIT Split, #7514

Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating.

The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F.

Capacity:

Size:

Weight: .5 lb

Our Price: $99.00

CellarPro RETROFIT Remote Display AH, #7525

Remote control kit and wiring for remotely locating CellarPro's control panel.

Capacity:

Size: 2 3/4w x 1 1/8h x 1 1/4d (mounting)

Weight: 5 lb

Our Price: $360.00

CellarPro Remote Display/Control Unit 220V, #7663

220V Remote control kit and wiring for remotely locating CellarPro's control panel.

Capacity:

Size: 2 3/4w x 1 1/8h x 1 1/4d (mounting)

Weight: 5 lb

Our Price: $245.00

Cold Temperature Compressor Heater RETROFIT AH, #7720

Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating.

The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F.

Capacity:

Size:

Weight: .5 lb

Our Price: $99.00

Cold Temperature Compressor Heater RETROFIT 1800, #15222

Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating.

The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F.

Capacity:

Size:

Weight: .5 lb

Our Price: $99.00

CellarPro VS / Split Duct HOOD (Cold Side) + REMOTE RETROFIT, #17328

Custom duct HOOD for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Insulated ducting is not included.

Required for use in moderate or high humidity environments.

Capacity: 100 Equivalent Feet

Size: 14 3/16w x 4 11/16d x 27 1/2h (in)

Weight: 45 lb

Our Price: $760.00