Light Removal / Replacement Instructions


Light Removal / Replacement Instructions




Le Cache Models: 1400, 2400, 3100, 3800 & 5200

LIGHT REMOVAL
  1. Unplug the cord on the end that is attached to the light fixture (the other end of the cord is plugged into the wine cooling unit).
  2. Slide the light fixture (ie the entire housing, including the bulb, lens cover and metal case) to the left or right until a mounting bracket or screw is exposed.
  3. Unscrew the mounting brackets or screw that attaches the light fixture to the ceiling of the wine cabinet.
  4. Slide the light fixture in the OPPOSITE direction until it comes off the second mounting bracket or screw.

LIGHT INSTALLATION

  1. Follow the above procedures in reverse to re-install the new fixture.

 

Le Cache Models: 10250, 10400, 10500, 10700 & 10800

LIGHT REMOVAL

  1. Unplug the cooling unit.
  2. Remove the lens cover using a small blade screwdriver. The bulb can be removed by twisting 1/4 turn and pulling away from the fixture.
  3. Remove the cover plate on lamp body.
  4. Twist off the two orange wire nuts, and pull the lamp cord out of the lamp body.
  5. Unscrew the screws that secure the fixture to the ceiling.
LIGHT INSTALLATION
  1. Follow the above procedures in reverse to re-install the new lamp.

    Note: The green wire is not used.