Breezaire "Warmer" Button Doesn't Work


Breezaire "Warmer" Button Doesn't Work



If the "warmer" button on Breezaire's control panel stops working, do the following:

  1. Unplug the cooling unit.

  2. Remove the light fixture as follows: - Slide the light left or right, and then unscrew and remove one of the two mounting brackets that attach the light fixture to the ceiling of the wine cabinet. - Slide the light fixture off the second mounting bracket.

  3. Unscrew the two screws that hold the control panel in place, and pull out the control panel.

  4. Blow hard 5-6 times in the gap behind the "warmer" button, and using a screwdriver, bend the black plastic tab 2-3 times towards the front of the control panel (refer to the following picture.)



  5. Replace the control panel and screw it in. Once the screws are in (but not before), plug in the cooling unit. The "warmer" button now should work.

  6. Reattach the light fixture.

 
See Also:How to Replace an Erratic Breezaire Control Panel